Specifications

Using the Menu System
Chapter 1: Configuring the Printer ❖ 1-87
LAA
Set the six byte Locally Administered
Address. The valid values are:
xxxx.xxxx.xxxx
where xx = 00 to FF hexadecimal
where the xxxx.xxxx.xxxx can equal any
value within the valid range of
4000 0000 0000 and 7FFF FFFF FFFF.
For this item (after Step 3),
Item
Up
moves the cursor to the right
through the displayed Locally
Administered Address and
Item
Down
moves the cursor to the
left. This allows you to change
characters within the string rather
than having to re-enter the entire
string.
With the cursor displayed under a
character,
Value Up
increments
the value of that character and
Value
Down
decrements the value.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Token Ring Menu
2. Press
Item Up
or
Item
Down
until you see:
Token Ring Menu
LAA
3. Press
Value Up
or
Value
Down
. You will see:
LAA =
xxxx.xxxx.xxxx
4. Press
Value Up
or
Value
Down
to change the value
of the character above the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down
Value
Up
or
Value Down
causes continuous scrolling
through the values.
LAA =
xxxx.xxxx.xxxx
5. To change other characters in
the Locally Administered
Address, press
Item Up
or
Item Down
to scroll right
or left respectively through the
character string, then press
Value Up
or
Value
Down
to change the value
of the character above the
cursor (as in Step 4).
LAA =
xxxx.xxxx.xxxx
6. When you have completed
setting the Locally
Administered Address, press
Enter
. You will see:
Token Ring Menu
LAA
7. Press
On Line
. You will see:
Ready
Table 1.24 Token Ring Menu functions
(continued)
Menu Item and Function Keystrokes Display
Table 1.24 Page 14 of 14