Specifications

Using the Menu System
Chapter 1: Configuring the Printer ❖ 1-69
Sub Net Mask
Set the four byte Sub Net Mask
address. The available values are:
xxx.xxx.xxx.xxx
Where xxx = 000 to 255
.
This item only appears if IP Address
Res. is set to
Static
.
For this item (after Step 3),
Item
Up
moves the cursor to the right
through the displayed Sub Net Mask
address and
Item Down
moves
the cursor to the left. This allows you
to change characters within the string
rather than having to re-enter the
entire string.
With the cursor displayed under a
character,
Value Up
increments
the value of that character and
Value
Down
decrements the value.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Ethernet Menu
2. Press
Item Up
or
Item
Down
until you see:
Ethernet Menu
Sub Net Mask
3. Press
Value Up
or
Value
Down
. You will see:
Sub Net Mask =
xxx.xxx.xxx.xxx
4. Press
Value Up
or
Value
Down
to change the value
of the character above the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down
Value
Up
or
Value Down
causes continuous scrolling
through the values.
Sub Net Mask =
xxx.xxx.xxx.xxx
5. To change other characters in
the Sub Net Mask address,
press
Item Up
or
Item
Down
to scroll right or left
respectively through the
character string, then press
Value Up
or
Value
Down
to change the value
of the character above the
cursor (as in Step 4).
Sub Net Mask =
xxx.xxx.xxx.xxx
6. When you have completed
setting the Sub Net Mask
address, press
Enter
. You
will see:
Ethernet Menu
Sub Net Mask
7. Press
On Line
. You will see:
Ready
Table 1.22 Ethernet Menu functions
(continued)
Menu Item and Function Keystrokes Display
Table 1.22 Page 10 of 12