Specifications

Interface Cards
6-50 ❖ System Administrator Guide
5
Remove the interface card by gently lifting it away from
the pin receptacle and pulling it away from the controller
board.
6
Re-install the cover plate on the controller board using
the two screws.
7
Replace the controller board and tighten the thumbscrews
by hand.
8
Re-attach the GFI power cord to the printer. Re-attach any
cables to printer ports.
9
Power ON the printer.
10
Print a Configuration Sheet (page 3-91) and confirm that
the proper network interface is now indicated on the
Configuration Sheet.