Specifications

Interface Cards
Chapter 6: Installing and Removing Printer Options ❖ 6-49
Removing
Follow the procedure below to remove the interface card.
To remove the card you will need either a Phillips head
screwdriver or a hex head nut driver.
1
Power OFF the printer.
2
Disconnect the GFI power cord from the printer.
Discharge any static electricity from your body
before continuing with the next step.
3
Loosen the thumbscrews and pull out the controller
board. Set it on a flat surface.
4
Use the screw driver/nut driver to remove the two screws
that hold the interface card in place as illustrated. Set the
screws aside.