Specifications

Control Panel Messages
Chapter 5: Troubleshooting ❖ 5-23
Power Saver On
The printer has set itself to lower power mode (Power Saver is on). As soon as
it receives the next print job, the printer leaves power saver mode.
Press Menu
This message appears when there are no secure jobs in the job queue. Press
Menu Up
or
Menu Down
to return to the Main Menu.
Print Using
<size> <type>
This messages appears when the available paper size or type does not match
what was requested and Value Up or Value Down was pressed. Use
Value
Up
or
Value Down
to find an acceptable available size and type,
then press
Enter
. If the paper size and type that was substituted is not
acceptable, load the requested paper size and type and print the job again.
Processing...
<job name>
This message appears when a job is being processed. The job’s name appears
on the second line.
Processing...
Config Sheet
A Configuration Sheet is being printed.
Processing...
DEMO
A Demo Page is being printed.
Processing...
Disk Directory
The Hard Drive directory is being created.
Processing...
Envelope Feeder
The Envelope Feeder is being used.
Processing…
Fault History
The printer is generating and printing a fault history log.
Table 5.2 Control Panel messages and corrective actions
(continued)
Message Description/Corrective Action
Table 5.2 Page 19 of 24