Specifications

Control Panel Messages
Chapter 5: Troubleshooting ❖ 5-17
IOT NVM Fail
Power Off/On
Nonvolatile Memory (NVM) has failed on the print engine (also called the
IOT—Image Output Terminal). Printing cannot resume. Power OFF and ON
the printer. If this message reappears, contact your Customer Support
Center.
Job n
This message appears after selecting a secure job to be printed or deleted. If
the job was given a name, that name appears in place of “
Job n
”. Print or
delete the job (see the following two messages).
Job n
Delete
This message appears from the Password Menu. It causes a specific job to be
deleted. If the job was given a name, that name appears in place of “
Job n
”.
Press
Value Up
or
Value Down
to toggle between
Delete
and
Print
.
Select
Delete
to delete the job and press
Enter
.
Job n
Print
This message appears from the Password Menu. It causes a specific job to be
printed. If the job was given a name, that name appears in place of “
Job n
”.
Press
Value Up
or
Value Down
to toggle between
Print
and
Delete
.
Select
Print
to print the job and press
Enter
.
Laser Failure
Power Off/On
The laser assembly has failed and printing cannot continue. Power OFF and
ON the printer. If this message reappears, contact your Customer Support
Center.
Table 5.2 Control Panel messages and corrective actions
(continued)
Message Description/Corrective Action
Table 5.2 Page 13 of 24