Specifications

Control Panel Messages
5-16 ❖ System Administrator Guide
Initializing...
This message appears for a few seconds while the printer is initializing.
Initializing…
Flash Memory
The printer is initializing the flash memory.
Insert Tray 1
The printer cannot feed from Tray 1. Make sure Tray 1 is properly inserted in
the printer.
Insert Tray 2
The printer cannot feed from Tray 2. Make sure Tray 2 is properly inserted in
the printer.
Insert Tray 3
The printer cannot feed from Tray 3. Make sure Tray 3 is properly inserted in
the printer.
Insert Tray 4
The printer cannot feed from Tray 4. Make sure Tray 4 is properly inserted in
the printer.
Insert Tray 5
The printer cannot feed from Tray 5. Make sure Tray 5 is properly inserted in
the printer.
Install
Print Cartridge
The Laser Print Cartridge is missing or is not installed correctly. Re-install the
existing Cartridge or install a new one. If the problem persists, contact your
Customer Support Center.
Install
Staple Cartridge
The Finisher is out of staples. Remove the empty Staple Cartridge and install
a new one. Refer to the section
“Adding Staples to the Finisher”
in Chapter 4
of the
User Guide.
IOT Memory Fail
Power Off/On
The Print Engine (IOT) memory has failed and printing cannot resume.
Power OFF and ON the printer. If this message reappears, contact your
Customer Support Center.
Table 5.2 Control Panel messages and corrective actions
(continued)
Message Description/Corrective Action
Table 5.2 Page 12 of 24