Specifications

Control Panel Messages
5-12 ❖ System Administrator Guide
Clear Area H
The Finisher compiler tray (Area H) safety switch is on. Remove the obstacle
from Area H.
Close Cover H
Finisher cover H is not closed entirely, or the Compiler cover safety switch is
open or the cover switch is open. Remove the obstacle from this area and
close the door.
Close Door A
Door A is open. Close Door A.
Close Door B
Door B is open. Close Door B.
Close Door C
Door C is open. Close Door C.
Close Door D
Door D is open. Close Door D.
Close Door E
Door E is open. Close Door E, the Gate Cover of the Finisher.
Close Door F
Door F is open. Close Door F, the Transport Cover of the Finisher.
Close Door G
Door G is open. Close Door G, the Top Cover of the Finisher.
Close Duplx Unit
The Duplex Module is open. Close the Duplex Module.
Close Staple
Door
The Finisher’s staple door is open. Close the stapler door.
CRUM Failure
Power Off/On
A Laser Print Cartridge memory failure has occurred. Power OFF and ON the
printer. If the problem returns, printing cannot resume. Power OFF the
printer and contact your Customer Support Center.
Table 5.2 Control Panel messages and corrective actions
(continued)
Message Description/Corrective Action
Table 5.2 Page 8 of 24