Specifications

Control Panel Messages
Chapter 5: Troubleshooting ❖ 5-11
Clear Area A,B
Reset Tray 2
A paper jam has occurred in Areas A and B. Use one of the following
procedures to clear Area A:
•
“Clearing Area A (Without Duplex Module)”
(page 5-33), or
•
“Clearing Area A (With Duplex Module)”
(page 5-35).
Then clear Area B (page 5-37) and reset Tray 2.
Clear Area A,B
Reset Tray 3
A paper jam has occurred in Areas A and B. Use one of the following
procedures to clear Area A:
•
“Clearing Area A (Without Duplex Module)”
(page 5-33), or
•
“Clearing Area A (With Duplex Module)”
(page 5-35).
Then clear Area B (page 5-37) and reset Tray 3.
Clear Area A,B,C
Reset Tray 4
A paper jam has occurred in Areas A, B, and C. Use one of the following
procedures to clear Area A:
•
“Clearing Area A (Without Duplex Module)”
(page 5-33), or
•
“Clearing Area A (With Duplex Module)”
(page 5-35)
Then clear Area B (page 5-37), clear Area C (page 5-37) and reset Tray 4.
Clear Area A,B,C
Reset Tray 5
A paper jam has occurred in Areas A, B, and C. Use one of the following
procedures to clear Area A:
•
“Clearing Area A (Without Duplex Module)”
(page 5-33), or
•
“Clearing Area A (With Duplex Module)”
(page 5-35).
Then clear Area B (page 5-37), clear Area C (page 5-37) and reset Tray 5.
Table 5.2 Control Panel messages and corrective actions
(continued)
Message Description/Corrective Action
Table 5.2 Page 7 of 24