Specifications

Control Panel Messages
5-10 ❖ System Administrator Guide
Check
Staple Cartridge
The Stapler cartridge is not in position. Verify that the Stapler cartridge has
been installed. and that it contains staples.
Check Toner
Cartridge
The Laser Print Cartridge is not seated correctly. Reseat the Laser Print
Cartridge. See
“Replacing the Laser Print Cartridge”
(page 4-2) for installation
instructions.
Clear Area A
Clear Env/Bypass
A paper jam has occurred in Area A. Clear the Envelope Feeder or the Bypass
Feeder. Then reset Tray 1.
Clear Area A
Reset Tray 1
A paper jam has occurred in Area A. Use one of the following procedures to
clear Area A:
•
“Clearing Area A (Without Duplex Module)”
(page 5-33), or
•
“Clearing Area A (With Duplex Module)”
(page 5-35).
Then reset Tray 1.
Clear Area B
Reset Tray 2
A paper jam has occurred in Area B. Clear Area B (page 5-37). Then reset Tray
2.
Clear Area C
Reset Tray 4
A paper jam has occurred in Area C. Clear Area C (page 5-37). Then reset
Tray 4.
Clear Area C
Reset Tray 5
A paper jam has occurred in Area C. Clear Area C (page 5-37).Then reset Tray
5.
Table 5.2 Control Panel messages and corrective actions
(continued)
Message Description/Corrective Action
Table 5.2 Page 6 of 24