Specifications

Control Panel Messages
Chapter 5: Troubleshooting ❖ 5-9
3000
†
-Serial
† Appears in the upper left
corner of the display.
A fault condition has occurred in the Serial interface. Power OFF the printer
and reseat the interface card. Power ON the printer. If this code appears
again at Power ON, contact your Customer Support Center.
3000
†
-Enet
† Appears in the upper left
corner of the display.
A fault condition has occurred in the Ethernet interface. Power OFF the
printer and reseat the interface card. Power ON the printer. If this code
appears again at Power ON, contact your Customer Support Center.
4000
†
-NIC
† Appears in the upper left
corner of the display.
A fault condition has occurred. Power OFF the printer and reseat the
interface card. Power ON the printer. If this code appears again at Power ON,
contact your Customer Support Center.
5000
†
-MEMORY
† Appears in the upper left
corner of the display.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
All Jobs
Delete
This message appears for secure printing. You can delete all secure jobs in
your queue. Press
Value Up
or
Value Down
to toggle between
Delete
and
Print
. Select
Delete
to delete all jobs and press
Enter
.
All Jobs
Print
This message appears for secure printing. You can print all secure jobs in your
queue. Press
Value Up
or
Value Down
to toggle between
Print
and
Delete
all jobs. Select
Print
to print all jobs and press
Enter
.
Canceling Job...
Job name
A job is being cancelled.
Table 5.2 Control Panel messages and corrective actions
(continued)
Message Description/Corrective Action
Table 5.2 Page 5 of 24