Specifications

Control Panel Messages
Chapter 5: Troubleshooting ❖ 5-7
0006
†
-COMM
† Appears in the upper left
corner of the display.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
0007
†
-ASIC
† Appears in the upper left
corner of the display.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
0008
†
-DMA
† Appears in the upper left
corner of the display.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
0009
†
-ROM BOARD
† Appears in the upper left
corner of the display.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
0010
†
-DISK
† Appears in the upper left
corner of the display.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
0040
†
† Appears in the upper left
corner of the display.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
0101
†
-DIMM1
† Appears in the upper left
corner of the display.
A fault condition has occurred in DIMM1.
1. Power OFF the printer.
2. Remove and reinstall DIMM 1.
3. Power ON the printer.
4. If the error code is redistilled, replace DIMM 1.
Refer to Figure 5.1 on page 5-29 for location of memory board.
Table 5.2 Control Panel messages and corrective actions
(continued)
Message Description/Corrective Action
Table 5.2 Page 3 of 24