Specifications

Installing the Maintenance Kit
4-18 ❖ System Administrator Guide
31
Replace the three feedrolls. (Refer to Step 21 on page 4-15
if necessary.)
32
Replace and close all paper input trays.
33
Reattach the power cord to the printer.
34
To reset the Maintenance Kit counter:
• Power OFF the printer.
• Hold down keys
and at the same time and
power ON the printer.
• Keep holding down keys and until the
message
*IOT?*
appears.
• Then within five seconds after the message appears,
hold down keys
and at the same time until
the next message
Reset Completed - Please
Reboot
appears. This confirms the counter reset.
• Reboot the Printer by powering OFF then Powering
ON.