Specifications

Using Custom Paper Sizes
Chapter 1: Configuring the Printer ❖ 1-119
Table 1.34 Custom Paper Size Examples.
Custom
Paper Size
Desired
Input Source
Required Steps
8 x 10 in. Multi Bypass
Feeder
1. In the application, format the page for Letter size paper, setting the
margins to correctly position the image on 8 x 10” paper if overlaid
by Letter size paper.
2. Load the 8 x 10” paper in the Multi Bypass Feeder.
3. Set the Tray Menu “MBF Size” to
Custom
.
4. Set the “
Custom Size”
to
Letter (8.5 x 11”)
.
5. Set the “
Tray Sequence”
to a value that does not include the MBF
(or set it to Off).
6. Request “MBF” as the paper source and send the job to the printer.
8.5 x 11 in.
Short Edge
Feed (SEF)
Multi Bypass
Feeder
1. In the application, format the page for Folio size paper (because Folio
is a short-edge feed size on this printer), setting the margins to
correctly position the image on the 11 inches to be used by this
paper.
2. Load the 8.5 x 11” paper into the Multi Bypass Feeder in the SEF
direction.
3. Set the Tray Menu MBF Size to Custom.
4. Set the Custom Size to Folio (8.5 x 13”).
5. Set the Tray Sequence item to value that does not include MBF (or
set to Off).
6. Request MBF as the paper source and send the print job.