Specifications

Using the Menu System
1-100 ❖ System Administrator Guide
Hex Mode
Set to print output as hexadecimal
codes instead of normal print data.
The available values are:
Off
On
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Test Menu
2. Press
Item Up
or
Item
Down
until you see:
Test Menu
Hex Mode
3. Press
Value Up
or
Value
Down
until you see:
Hex Mode =
New Value
4. Press
Enter
. You will see:
Test Menu
Hex Mode
5. Press
On Line
. You will see:
Ready
Restart Printer
Re-boot the printer without powering
it off and powering it on again. The
available values are:
Yes
No*
You must select Yes and press
Enter
for this function to
take effect.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Print Menu
2. Press
Item Up
or
Item
Down
until you see:
Print Menu
Restart Printer
3. Press
Value Up
or
Value
Down
until you see:
Restart Printer=
New Value
4. Press
Enter
. You will see:
Print Menu
Restart Printer
5. Press
On Line
. You will see:
Ready
Table 1.28 Print Menu functions
Menu Item and Function Keystrokes Display
Table1.28 Page4 of 4