Specifications

Using the Menu System
1-94 ❖ System Administrator Guide
NDS Tree
Set the NDS Tree character string
(from 0 to 63 characters in length).
The available values are:
Null
A - Z, 0 - 9, hyphen (-) and underscore (_)
For this item (after Step 3),
Item
Up
moves the cursor to the right
through the displayed NDS Tree
character string and
Item Down
moves the cursor to the left. This
allows you to change characters
within the string rather than having to
re-enter the entire string.
With the cursor displayed under a
character,
Value Up
increments
the value of that character and
Value
Down
decrements the value.
From any cursor position, you
can null out (delete) to the end
of the string by selecting the
space character with
Value
Up
or
Value Down
and
then pressing
Enter
.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Novell Menu
2. Press
Item Up
or
Item
Down
until you see:
Novell Menu
NDS Tree
3. Press
Value Up
or
Value
Down
. You will see:
NDS Tree =
xxx...xxx
4. Press
Value Up
or
Value
Down
to change the value
of the character above the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down
Value
Up
or
Value Down
causes continuous scrolling
through the values.
NDS Tree =
xxx...xxx
5. To change other characters in
the NDS Tree character string,
press
Item Up
or
Item
Down
to scroll right or left
respectively through the
character string, then press
Value Up
or
Value
Down
to change the value
of the character above the
cursor (as in Step 4).
NDS Tree =
xxx...xxx
6. When you have completed
setting the NDS Tree, press
Enter
. You will see:
Novell Menu
NDS Tree
7. Press
On Line
. You will see:
Ready
Table 1.26 Novell Menu functions
(continued)
Menu Item and Function Keystrokes Display
Table1.26 Page6 of 7