Specifications

Using the Menu System
1-92 ❖ System Administrator Guide
PServer Name
Set the name of the PServer in this
printer (a name of 2 to 47 characters
in length). The available values are:
A - Z, 0 - 9, hyphen (-),underscore (_)
XRX_<macaddress>*
For this item (after Step 3),
Item
Up
moves the cursor to the right
through the displayed PServer name
and
Item Down
moves the cursor
to the left. This allows you to change
characters within the string rather
than having to re-enter the entire
string.
With the cursor displayed under a
character,
Value Up
increments
the value of that character and
Value
Down
decrements the value.
From any cursor position, you
can null out (delete) to the end
of the string by selecting the
space character with
Value
Up
or
Value Down
and
then pressing
Enter
.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Novell Menu
2. Press
Item Up
or
Item
Down
until you see:
Novell Menu
PServer Name
3. Press
Value Up
or
Value
Down
. You will see:
PServer Name =
xxx...xxx
4. Press
Value Up
or
Value
Down
to change the value
of the character above the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down
Value
Up
or
Value Down
causes continuous scrolling
through the values.
PServer Name =
xxx...xxx
5. To change other characters in
the PServer name, press
Item
Up
or
Item Down
to
scroll right or left respectively
through the character string,
then press
Value Up
or
Value Down
to change the
value of the character above
the cursor (as in Step 4).
PServer Name =
xxx...xxx
6. When you have completed
setting the PServer Name,
press
Enter
. You will see:
Novell Menu
PServer Name
7. Press
On Line
. You will see:
Ready
Table 1.26 Novell Menu functions
(continued)
Menu Item and Function Keystrokes Display
Table1.26 Page4 of 7