Installation manual

Preface
HOW TO USE THIS MANUAL
The manual is divided into four parts.
Part 1, GETTING STARTED, should be read first by everyone. Chapter 1
summarizes MultiRam RGB’s features and minimum hardware requirements.
Chapter 2 gives step-by-step instructions for installing MultiRam RGB and
adding memory to the card. Chapter 2 is required reading for those of you who
intend to install your own RAM. Chapter 3 covers testing and troubleshooting
procedures.
Part 2, USING THE MULTIRAM RGB CARD, shows how to use the software
included with your MultiRam RGB Card. Chapter 4 explains how to use
MultiRam RGB’s large memory with AppleWorks. Chapter 5 shows how to
use the MultiRam RGB card as a fast RAM disk drive for ProDOS and DOS
3.3. Chapter 6 covers software and hardware compatibility questions.
Part 3, THE MULTIRAM RGB SERVICE GUIDE, should be read by everyone.
Chapter 7 describes the MultiRam RGB warranty and how you can get service if
you have a problem and explains RAM replacement and software update policies.
This manual assumes you know how to operate your Apple //e. If you are a
new Apple lie owner or if any terms or procedures in this manual are unfamiliar
to you, please refer to your Apple lie owner’s manual for help. Computer
magazines, computer books, Apple user groups, your local Apple dealer and
Checkmate Technology, Inc. are all sources of additional help. Finding local
Apple dealers and user groups has been made easier by Apple Computer, Inc.
since they provide a toll free phone number, 800-538-9696 extension 500, for
this information. Apple’s own software publisher is Claris Corp. To reach
their Technical Support call [phone], and for Customer Service call
[phone].
page i