Installation manual

AppleWorks Expansion
NOTE: You may wish to refer to your copy of PRODOS SUPPLEMENT
TO THE APPLE //E OWNER’S MANUAL (for the old //e) or the PRODOS
TECHNICAL REFERENCE MANUAL in order to review pathnames.
Adding Other Patches or Features
Once the MultiRam disk has finished expanding AppleWorks, start the new
disk to make sure that it works BEFORE adding other enhancements.
PATCH.PATCH
This is a BASIC program that allows customization of the AppleWorks
program. These include skipping the initial AppleWorks title screen,
skipping the date screen, turning off/on the memory in use indicator, and
more.
To run PATCH.PATCH boot the MultiRam disk with the AppleWorks
Expander side up. At the main menu choose the option exit to BASIC. Make
sure the [caps lock] key is on and type:
RUN PATCH.PATCH [RETURN]
PATCH.PATCH clears the screen and prompts you for the AppleWorks disk
or the pathname on which it is found. When the AppleWorks startup disk is
placed in the disk drive, PATCH.PATCH will ask questions about
customizing your AppleWorks program.
EXPANSION PROBLEMS
The following are some error messages that you might receive while
expanding your AppleWorks:
Can’t Follow the Path
The volume or subdirectories are not the same as what actually exists. Use
the Filer or some other disk utility like Copy II Plus or Cat Doctor to
check the volume and subdirectory pathnames. Copy II Plus has a tree
display of the ProDOS pathnames.
page 35