Installation manual

AppleWorks Expansion
INSTRUCTIONS
There is a specific sequence for expanding AppleWorks. Failure to follow this
sequence will create problems. Briefly the sequence is:
1. Make a copy of an UNMODIFIED AppleWorks.
2. Boot the MultiRam disk and follow the on screen instructions.
3. Add any other enhancements, i.e. TimeOut, PinPoint, Jeeves,
Fingertips, etc. following their instructions.
4. Use this improved AppleWorks.
ALWAYS work with a copy of AppleWorks. ALWAYS make all
modifications and patches to a working copy of AppleWorks. NOT to the
original disk. Do not copy an AppleWorks disk previously modified with
enhancements. This includes previously expanded MultiRam AppleWorks.
PinPoint, MacroWorks, TimeOut, Fingertips and the time display within
AppleWorks for clock cards. Exceptions to this are AppleWorks with custom
printers, custom data disk drives or pathnames, ProDOS modified for clock
drivers and modified help files (from MacroWorks). The MultiRam disk will
not recognize a previously modified AppleWorks disk and will not expand it.
The “MultiRam Software Manual” chapter 2 explains in more detail what can
and can not be left on AppleWorks.
Copy the unmodified AppleWorks to two 5.25 floppy disks, or one 3.5
diskette, or to a 200K subdirectory on your hard disk. AppleWorks copied to
the 3.5 diskette or a hard disk must have the original Startup and Program files
in the same subdirectory.
Floppy Disk Expansion
After copying AppleWorks, boot the MultiRam disk. From the main menu
choose the version of AppleWorks to be expanded. Follow the MultiRam
disk’s on-screen instructions to complete the expansion of AppleWorks.
Hard Drive and 3.5 Disk Drive Expansion
After copying AppleWorks to a 3.5 diskette or the hard drive, boot the
MultiRam disk. From the Main Menu chose the version of AppleWorks to
be expanded and follow the on screen instructions. When asked for the
PREFIX OR PATH’, type in the pathname where AppleWorks can be found.
page 34