Installation manual

Installation

Date

Computer, Inc.

Serial Number

Apple //e Motherboard

Figure 2.3

Inserting The Card

The MultiRam RGB must be inserted into the auxiliary Apple //e

motherboard.

connector slot on the

Be sure the power to the //e is turned off. It is best to be completely sure by

unplugging the power cord.

WARNING: YOU SHOULD NEVER INSERT OR REMOVE A

PERIPHERAL CARD WITH THE POWER ON BECAUSE IT WILL

ALMOST CERTAINLY DAMAGE COMPONENTS ON THE

MOTHERBOARD AS WELL AS THE PERIPHERAL CARD. YOU WILL

VOID TIlE MULTIRAM RGB WARRANTY IF THE CARD IS REMOVED

OR INSERTED WITH THE POWER ON.

page 20