Installation manual

Introduction
- Easily user upgradeable at any time with 13 memory configurations possible:
64K 320K 576K 1024K
128K 384K 640K
192K 448K 768K
256K 512K 832K
- Has five LED card/64K bank display indicators for programming
convenience and operational verification
- Expansion connector to allow an optional memory card to be added to the
back of the RGB card
- 16 bit CPU port to allow direct linear memory addressing by 16 bit
microprocessors and an optional MultiRam EX 65C816 processor board
- Software included to:
** Configure AppleWorks to use all of MultiRam RGB’s memory
** Use MultiRam RGB as a ProDOS RAM disk emulator
** Use MultiRam RGB as a DOS 3.3 RAM disk emulator
** Test MultiRam RGB memory for defective RAM
** SQUIRT, An easy to use ProDOS program selector
- RGB video output supporting 80-column text (green), 16 color LORES
graphics, 8 color HIRES graphics, and 16 color Double HIRES graphics
(140 x 192 pixels with 16 colors, 560 x 192 pixels with monochrome only,
and mixed 140 x 192 and 560 x 192 anywhere on screen).
- Optional cables for either Apple TTL RGB monitors or the IBM TTL
RGB monitors
- 80-column standard video
- Supports double hi-resolution graphics
- Jumper allows card to work in older, lion-enhanced Apple //e “A”
motherboards
- Compatible with both the enhanced and non-enhanced Apple //e
- Software updates available from Checkmate
page 4