Specifications

Adjustments Non-User Controls - 14
let it remain off for at least two minutes.
Important: Do not attempt this procedure without the Apple
high-voltage probe (Apple part number 076-0392). Use
only the Apple high-voltage probe. Other high-voltage
probes will not give accurate readings for this procedure.
5 Attach the Apple high-voltage probe to the multimeter
and attach the ground wire to the chassis.
±
Warning: Voltage at the anode, with the power on, can
cause serious injury. Double-check all multimeter
connections before taking the reading.
6 Be sure the monitor is attached to a computer and has
power.
7 Turn on the monitor.