Manual

The power indicator light goes on. If the power indicator light does not go on,
press the power switch again. If this doesn’t work, make sure you’ve connected
the monitor to your computer properly (see “Connecting the Monitor to Your
Computer” earlier in this chapter.) Also, make sure your computer is turned
on.
Note: You only need to turn on your monitor once, because the monitor is
designed to get its power from your computer. From now on, the monitor
turns off automatically when you shut down the computer, and it will turn on
automatically when you start up the computer.
To make full use of the features available to you with this monitor, install the
Macintosh software.
Installing Macintosh software
Note: Be sure you’re acting within the terms of the software license
agreement before you install this software on a computer. The license
agreement specifies how many copies of the program you can make for
yourself and others.
To install the monitor software on a Macintosh computer, follow these steps:
1 Insert the Apple Multiple Scan Software for Macintosh disk into a floppy disk drive.
The disk’s icon appears on the desktop, as shown in the next step.
2 Double-click the disk icon to see what’s on the disk.
11
Setting Up