Specifications

Testing
Rev 2.0 Apr.10 Proprietary and Confidential 87
Suggested testing equipment
To perform production and post-production tests, you require appropriate testing
equipment.
Figure 8-2 on page 88 shows a suggested test station for use with devices
incorporating AirPrime embedded modules, and Recommended Dev Kit test
setup on page 89 shows a supported Dev kit setup.
In the test station as shown, a test computer coordinates testing between the host
device with an integrated module and the measurement equipment. If the test
computer does not have direct access to the module, then the host device must
have custom software to forward instructions from the test computer to the
module.
This suggested station setup includes:
• Audio analyzer—Evaluate Tx.
• Power meter—Evaluate current consumption for Tx and Rx in various modes.
• Signal generator—Evaluate Rx.
When using this setup, you can allow the signal generator to run continuously
throughout the production testing procedure.