Specifications

Power Interface
Rev 2.0 Apr.10 Proprietary and Confidential 29
Averaged Call Mode GSM/EDGE data DC power consumption (with 4 time slots)
GSM/GPRS GSM 850,
GSM 1900
650 mA Max PCL for each band
d
300 mA 10 dBm Tx
EDGE 620 mA Class 12
d
Peak current (averaged
over 100 s)
2.60 A Worst case on 850.
a. All measurements are preliminary values
b. Highest current is on Band II (PCS1900)
c. Approximate current difference between speeds = 30 mA
d. Highest current is on 850 band Class 10 (Class 12 implements power backoff).
Table 2-5: Current specifications (MC8700)
a
,
b
Description Band Typ Max Units Notes/Configuration
Averaged standby DC current consumption
With Sleep mode activated (assumes USB bus is fully suspended during measurements)
Not supported by this product.
With Sleep mode deactivated (assumes USB bus is fully suspended during measurements)
Not supported by this product.
Low Power Mode (LPM)/Offline Mode
Not supported by this product.
Averaged Call Mode WCDMA/HSPA/HSPA+ data DC power consumption
WCDMA Bands I, II, V, VI,
VIII
700 mA 384 kbps at 20 dBm Tx power
c
360 mA 0dBm Tx power
HSUPA 760 mA 2 Mbps at 20 dBm Tx power
470 mA 0dBm Tx power
HSDPA
(1.8 Mbps/3.6 Mbps/
7.2 Mbps)
820 mA All speeds at 20 dBm Tx power
d
450 mA 0dBm Tx power
HSPA+ (21.1 Mbps) 850 mA 20 dBm Tx power
500 mA 0dBm Tx power
Peak current (averaged
over 100 s)
1000 mA
Table 2-4: Current specifications (MC8201)
a
(Continued)
Description Band Typ Max Units Notes/Configuration