Owner's Manual

Viewing Photos and Videos on a TV or Other Video Device
With iPhone and most iPod models, you can use the Dock to view photos and video
on a
TV or other video device (such as a digital projector). The TV or other device must
have standard
RCA type connectors that support either composite or component
video signals.
To connect the Dock, you need an Apple Composite AV Cable or Component AV Cable.
Choose your cable based on
the available inputs on your TV or video device. These
cables
are available separately at www.apple.com/store.
Important: Make sure you enable your iPod or iPhone to send a video signal out to
your TV or receiver. For more information, see the user guide for your iPod or iPhone.
Before you begin connecting components,
turn down the volume on your iPod or
iPhone, turn
off iPod or iPhone, and turn off the power to all your components. Make
all connections firmly to avoid hum and other noise. For information about avoiding
hearing damage,
see page 13.
To connect the Dock to your TV, receiver, or video device:
1 Connect the
AV Cable to the dock connector port on the Dock and to your TV or video
device.
See the instructions that came with your AV Cable.
2 Turn on your iPod or iPhone and your
TV or video device to start playing.
To display photos or videos on your TV or video device:
•
See the user guide for your iPod or iPhone, available on the web at:
www.apple.com/support/manuals
8 English