3

Chapter 6 Filter eects 112
AutoFilter envelope
The envelope is used to shape the lter cuto over time. When the input signal exceeds the set
threshold level, the envelope is triggered.
Envelope parameters
•
Attack knob and eld: Rotate to set the attack time for the envelope.
•
Decay knob and eld: Rotate to set the decay time for the envelope.
•
Sustain knob and eld: Rotate to set the sustain time for the envelope. If the input signal falls
below the threshold level before the envelope sustain phase, the release phase is triggered.
•
Release knob and eld: Rotate to set the release time for the envelope. This is triggered as soon
as the input signal falls below the threshold.
•
Dynamic knob and eld: Rotate to determine the input signal modulation amount. You can
modulate the peak value of the envelope section by varying this control.
•
Cuto Mod. slider and eld: Drag to determine the impact of the envelope on the
cuto frequency.