2

60
Chapter 6 Working with Concerts and Sets
Drag the Send knob next to the slot to set the amount of the signal sent through the 3
bus to the aux.
A new auxiliary channel strip, Aux 3, appears in the Channel Strips area.
Add a concert-wide eect to the aux:
Click one of the Insert slots on the Aux 3 channel strip, then choose an eect from the m
Eects menu. Try out dierent eects and see how they change the sound of the patch.
Double-click the eect in the Insert slot to open the plug-in window, then adjust m
parameters in the plug-in window.
Choose another patch and click one of the Send slots on a channel strip in the patch. m
Bus 3 (Aux 3) is available to add to a channel strip in any patch in the concert.
You can also add concert-wide eects to an aux at the patch level if Show Signal Flow
Channel Strips is active.