User Guide

Mac Pro Take Apart — Memory Cage with Rear Fan 75
Replacement Note for Cages with Stripped Screws: If either of the two short mounting
screws for the memory cage stripped while you were attempting to take out the heatsink cover
(see step 2 in “Processor Heatsink Cover,” the screw and hex stando will stay attached to
the memory cage when you remove it. In this case, before replacing the memory cage in the
enclosure, do the following.
• Using pliers and a socket wrench, separate the hex stando from the mounting screw.
• Replace the hex stando in the enclosure.
Note: To avoid future problems, make sure both standos are securely fastened before you
reinstall the memory cage.
Note: Order screw 922-7703 to replace any stripped, short screws used in securing the memory
cage..