User Guide
Mac Pro Take Apart — Mac Pro RAID Card and Battery 67
Replacing the Mac Pro RAID Card
Connect the iPass cable to the Mac Pro RAID Card.1.
Align the card’s connector with expansion slot 4 and press until the connector is inserted all 2.
the way into the slot. Make sure the card also engages slot 4 in the PCI card guide.
Note:
Don’t rock the card from side to side; instead, press the card straight into the slot. •
Don’t force the card. If you meet a lot of resistance, pull the card out. Check the connector •
and the slot for damage or obstructions, then try inserting the card again.
Pull the card gently to see if it is properly connected. If it resists and stays in place and its •
gold connectors are barely visible, the card is connected.
Note: System Proler does not display the serial number for the Mac Pro RAID Card. You can nd
the serial number by checking the serial number sticker on the back of the card.