User Guide

Mac Pro Take Apart — Processor Heatsink Cover 54
Processor Heatsink Cover
Tools
The only tools required for this procedure are the following:
Long-handled, magnetized #1 Phillips screwdriver•
Short-handled, magnetized jeweler’s #1 Phillips screwdriver or right-angle, magnetized #1 •
Phillips screwdriver
Apple Mac Pro wrench (part number 922-8025)•
Flat-blade screwdriver•
Preliminary Steps
Before you begin, open the computer, lay it on its side with the access side facing up, and remove
the following:
PCI Express card installed in slot • 1
Top and bottom memory card• s
Part Location