User Guide

Mac Pro Take Apart — Power Supply 34
Starting with the top connector and working down, release the four power harness cable 2.
connectors from their openings in the media shelf divider.
Note: Each connector has two locking latches that hold it to the divider. To release the
connector, depress the bottom latch rst and then the top latch. You may nd a at-blade
screwdriver useful in depressing the latches.
Placing a hand on either side of the media shelf divider, thread the J1 connector on the 3.
power supply cable through the top connector opening in the media shelf divider and
connect it to the PS1 connector on the power harness.