User Guide

Mac Pro Take Apart — AirPort Antenna Board with Cables 11 0
AirPort Antenna Board
with Cables
The AirPort Extreme antenna cables are part of the AirPort antenna board assembly. To remove or
replace the cables, you must replace the antenna board assembly
Tools
The only tools required for this procedure are a jeweler’s at-blade screwdriver and a magnetized
jeweler’s Phillips #0 screwdriver.
Preliminary Steps
Before you begin, open the computer, lay it on its side with the access side facing up, and remove
the following:
All hard drives and hard drive carrier• s
All PCI Express card• s
Top and bottom memory card• s
Processor heatsink cove• r
Front fan assembl• y
Processor heatsink• s
Memory cag• e
Speaker assembl• y
USB cabl• e
AirPort Extreme card (if installed• )
Bluetooth card (if installed• )
Logic boar• d