Specifications

Working Inside Your Server 51
Installing Your Card
Install an AGP card in slot 1 only. Install PCI expansion cards in the slots labeled PCI 2, 3, 4,
and 5.
1 Remove the screw that holds the port access cover in place, pull out the access cover, and set
it aside.
m To remove a card that’s installed in the server, remove the screw that holds the card in
place and pull the card from the slot.
Warning Cables with large connectors may interfere with the enclosure in the PCI slot
numbered 5, making it difficult to close the door and potentially causing damage to your
PCI card. If this is the case, rearrange the cards in the slots. You may also connect the
cable after the enclosure door is shut, but be sure to remove the cable before opening the
door again. If your PCI cards are connected to each other with cables or jumpers, take
care when closing the door.
Port access cover
Remove the screw that
holds the port access
cover in place.
If you need to
remove the card in
the AGP slot, press
this tab to release the catch.