Specifications

Working Inside Your Server 49
6 Replace the drive carrier in the chassis and reinsert the screws.
7 Attach the power and ribbon cables to the drives.
8 Replace the metal shield, taking care not to crimp the cables.
9 Close the server.
Reinstall the optical drive carrier in the computer. Make sure this guide
engages the slot in the chassis. Push the carrier forward until it is firmly
seated, and then tighten the two screws.
Reinstall the metal shield. Make sure it
engages these guides. Be careful not
to crimp or abrade any cables.
Attach the power cables and ribbon
cables to the optical drives. The end
connectors on the cables attach
to the top drive, and the middle
connectors attach to the bottom drive.