Specifications

48 Chapter 3
4 Slide the carrier back and remove it from the server.
5 Install the second optical drive in the drive carrier and screw it into position.
Slide the carrier back a
short distance until it
disengages from the
chassis, then remove
the carrier from the
computer.
Unscrew these two screws from
the optical drive carrier. Depending
on your computer model, the screws
may or may not come out completely.
Slide the optical drive
into the drive carrier.
There are four extra screws stored on the outside of the drive
carrier. You can use these screws if your second optical drive
didn’t come with any. If it did come with screws, use those.
Screw the optical drive in place with four screws.