Specifications

46
Chapter 3
Installing Ultra160 LVD SCSI Drives
If your Macintosh has an internal Ultra160 LVD SCSI drive, you can connect up to three more
internal Ultra160 LVD SCSI drives to the PCI card and cable inside the server—for a total of
four SCSI drives. This cable has the required connectors and a built-in terminator, so you
don’t need to add one.
Note: If your server doesn’t have a SCSI hard disk drive, you need to install a SCSI PCI card
in your server to connect SCSI hard disk drives.
SCSI ribbon cable
SCSI terminator
PCI SCSI card
The ribbon cable may attach
to a different position on the PCI SCSI
card, depending on the card you have.
Make sure all of the power
cord and ribbon cable
connectors are firmly attached
to all of the drives and to the
PCI SCSI card.
LL2127EX Page 46 Monday, July 22, 2002 1:11 PM