Specifications

Working Inside Your Server 35
1 Open the ejectors on the DDR SDRAM slots you want to use by pushing down on them.
2 Align the SDRAM in the slot and push both ends of the SDRAM down until the tabs are
vertical and the ejectors snap into place. Close the server.
Important Do not touch the SDRAM connectors. Handle the SDRAM only by the edges.
SDRAM DIMM (Your DIMM’s shape and components may vary.)
T
he SDRAM DIMM is designed to fit into
the slot only one way. Be sure to align the
notch in the DIMM with the small rib
inside the slot. With the ejectors in the
open position (as shown), push down
on the DIMM until it snaps into place.
T
he ejectors will automatically close.
Connectors Notch SDRAM slot (1 of 4)
Ejectors
(They should be pushed outward and down
to be in the open position, as shown.)
Rib (inside slot)