Specifications

Setting Up
17
Optical drive carrier
Install a second optical drive in the lower section of the optical drive carrier inside
your server.
Front hard disk drive carrier
Install additional hard disk drives in the front drive carrier inside your server. You can
install up to two ATA/66 drives or up to two SCSI drives in the front carrier.
Battery
Your server uses a battery that you rarely replace. If you find that your server is having
trouble starting up, or that the system date and time are frequently incorrect, you may
need to replace the battery. For more information, see “Replacing the Battery” on page 53.
AirPort Card connector
Connect an AirPort Card, which allows your server to communicate with a
wireless network.
Rear hard disk drive carrier
Install additional hard disk drives in the rear drive carrier inside your server. You can install
up to two ATA/100 drives or up to two SCSI drives in the rear carrier.
DDR SDRAM slots
Expand your server’s memory up to 2 GB. Add additional memory in your server by
inserting up to 4 DDR SDRAM DIMMs in the memory slots.
AGP 4X graphics slot
Connect your monitor through the advanced graphics port (AGP 4X) card, which provides
fast graphics processing power. You can connect a monitor that has an Apple Display
Connector (ADC) or a Digital Visual Interface (DVI) connector.
PCI expansion slots
Install up to four 64-bit, 33 MHz PCI cards in slots 2 through 5 to expand your server’s
capabilities.