Installation guide

15 Reinsert the security screws on either side of the back panel.
16 Reconnect any cables you disconnected at the start of this
process.
To reset the system date and time, as well as other system
parameters, see the user’s guide that came with your
computer.
Skip the steps that follow (“Installing the Card in Style B”)
and go on to the section titled “Installing the Software.”
Installing the card in Style B
1 Turn off the computer.
m Choose Shut Down from the Special menu, or press the
Power key on the keyboard.
m Press the power switch at the back of the computer.
Press the side of the switch marked with the j symbol.
continues .
Reinsert both security screws.
23
Installing the MPEG Card