Computer Personal Computer User's Manual

3Plug the end of the cable with the stereo miniplug into the sound output port (

) on the

Macintosh.

4Plug the other end of the cable into the speakers’ Audio In port or ports.

If the speakers take a dual-plug cable, connect both plugs to the speakers’

Audio In ports.

5Connect the speakers together with speaker wires, if necessary.

6 Turn on the computer.

Now you’re ready to hear full-range stereo sound coming from the speakers.

Note: To adjust the overall volume, use the sound control buttons on the front

of the computer or the volume controls in the Monitors & Sound control

panel. (For more information, see “Adjusting Volume and Sound,” in the

section, “Using Your Computer’s Sound Features,” earlier in this chapter.)

For more information about using speakers attached to your computer, see

the “Sound” topic of Macintosh Guide, available in the Guide (h) menu.

Sound

input port

Sound

output port

Chapter 3