Owner's manual

Testing a SCSI hard disk

You can test an Apple SCSI hard disk with the Apple HD SC Setup program,

which is on the Macintosh Performa CD that came with your computer.

1 Start up your computer from the

Macintosh Performa CD

See “Starting Up From a CD-ROM Disc” earlier in this section.

2 Open the Apple HD SC Setup program.

3 Click Drive until the disk you want appears.

4 Click Test.

5 When a message tells you that testing is complete, click Quit.

If the test reveals a problem, you may be able to correct it by using Disk First

Aid or another disk repair program (see the instructions in the next section),

or you may need to reinitialize the disk (see “Initializing a Hard Disk” later in

this chapter). Consult an Apple-authorized service provider for assistance if

necessary.

Chapter 5

SCSI ID number of the currently selected hard disk

Name of the currently selected hard disk