Owner's manual

4 Attach the monitor cable adapter to the monitor cable.
5 Attach the adapter to the monitor port on the back of the computer.
The monitor port (sometimes called the high-density monitor port) is marked
with the symbol ™. To connect, firmly push the cable or adapter into the
port until you hear a click.
Note: If you upgrade your Macintosh with an AV card, see Appendix C,
“Adding AV Capability to your Macintosh Performa,” for more information
about connecting a monitor.
Monitor cable adapter: attach
a standard monitor cable to this
adapter, then connect the adapter
to the monitor port.
Monitor cable
Monitor cable adapter
Monitor cable
5
Getting Started