User`s guide

Installing a processor-direct slot (PDS) card
1 Remove the plastic access cover from the vertical plate.
2 Remove the processor-direct slot (PDS) expansion card from its static-proof bag.
Hold the card by its edges to avoid touching the connectors on the card.
3Align the card over the processor-direct slot.
4Press down on the card until the connector is solidly in place.
Don’t force the card. If you meet resistance, pull the card out and try again.
To s ee if the card is properly connected, lift it gently. If it resists and stays in
place, it’s connected.
Processor-direct slotPDS access port
Vertical plate
Squeeze the two plastic tabs together and pull off the
metal retainer so the access cover can come off.
Processor-direct slot
Vertical plate
Metal retainer
91
Installing an Expansion Card