Specifications

Troubleshooting Symptom Charts/Peripherals (Continued) - 13
Peripherals (Continued)
Known-good
LaserWriter does not
print
1 Make sure that Chooser and Control Panel settings are
correct.
2 Make sure System is version 6.0.7 (or later) for Macintosh
LC, version 7.0.1 (or later) for Macintosh LC II, or version
7.1 (or later) for LC III/475 and Quadra 605.
3 Reset PRAM.
Known-good
ImageWriter or
ImageWriter II does
not print
1 Make sure that Chooser and Control Panel settings are
correct.
2 Make sure System is version 6.0.7 (or later) for Macintosh
LC, version 7.0.1 (or later) for Macintosh LC II, or version
7.1 (or later) for LC III/475 and Quadra 605.
3 Check printer DIP switches.
4 Reset PRAM.
5 Replace printer interface cable.
6 Replace logic board. Retain customer’s SIMMs.