Instruction Manual

In this chapter
The DOS-compatibility card inside your computer supports network drivers
that conform to Novell's Open Data-Link Interface (ODI). This appendix
contains instructions for installing such network management software. It
covers
m installing NetWare client software
m installing Novell’s LAN Workplace for DOS TCP/IP software
m installing NetManage’s Chameleon TCP/IP software
m installing Windows for Workgroups
m installing Spry’s Air Series TCP/IP software
m installing Mosaic
Installing NetWare client software
The instructions below will guide you through installation of client software
for Novell NetWare versions 3.12, 4.01, and 4.02. PersonalNetWare is not
supported at this time. You must have Windows installed before installing the
NetWare client software. If you need to reinstall Windows, see “Reinstalling
PC Software” in the section “Reinstalling the DOS-Compatibility Software”
in Chapter 8.
163
Appendix E
Installing Network Management Software