Manual

MacBook Pro 17-inch (original, Core 2 Duo, 2.4/2.6GHz, 2008) Take Apart — Bluetooth Card 74
Verify that the rubber pad is in place on the bottom of the bracket. Order a new bracket, if 9.
needed.
Install a replacement antenna as shown below. 10. Note: The antenna cable is attached on the
bottom of the antenna board, and routes in a channel in the bracket.
If present, re-install the foil EMI shield, using a reverse order of step 3 (see previous) starting 11 .
with the top. If need be, the EMI shield is available to order as a separate part (922-7969).