Manual

MacBook Pro 17-inch (original, Core 2 Duo, 2.4/2.6GHz, 2008) Take Apart — Logic Board 12 6
Remove the twelve Torx T6 screws, shown. Two screws that secure the fan to the frame are 3.
indicated below under the LVDS cable.
Warning: Do NOT allow the logic board to ex at any time. Flexing the board can crack 4.
solder joints to components. Give special attention at the narrow neck of the fan cutout.
Use a black stick under the extension of the heatsink, just below the rear of the left fan, then 5.
slowly begin to lift the board, avoiding any exing.
Note: The the logic board and heatsink assembly, along with the fans, should easily lift up. If
not, verify that all the appropriate screws and connectors have been removed.