Manual

MacBook Pro 17-inch (original, Core 2 Duo, 2.4/2.6GHz, 2008) Take Apart — Logic Board 121
Tape the thermal sensor cable to the display assembly to avoid getting it trapped under the 1.
logic board and forgetting it during reassembly. Important: Do not tape over connectors
with exposed contacts. Residual adhesive from the tape can contaminate the contacts.
Remove the thirteen Torx T6 screws, shown. 2.
Warning: Do NOT allow the logic board to ex at any time. Flexing the board can crack 3.
solder joints to components. Give special attention at the narrow neck of the fan cutout.